hello world!
 View Us on Maps
  • Over 25 Years of Great Products & Service

  • Call Us Today for a Quote on Your Next Project

 (800) 966-5142

STM-40

Soft Tissue Model Silicone

Details

STM - 40 is a high tear strength, high elongation addition cure mold making RTV silicone rubber. It has low shrinkage and reproduces the most intricate detail. It is a thixotropic, fast curing, material with outstanding release properties. STM - 40 contains no by-products, and is non-allergenic.

  • Color: Clear (Part B)Pink (Part A)
  • Viscosity, cps: Thixotropic (Part A)Thixotropic (Part B)
  • Specific Gravity: 1.08 (Part A)1.14 (Part B)
  • Mix Ratio: 1:1
  • Min. Pot Life: 3-5 (@ 72°F)
  • Shelf Life: 12 months
  • Durometer Hardness: 45 (Shore A)
  • Tensile Elongation: 1200 %
  • Tear Strength: 75 lb/in., Die B
  • Service Temperature Range: -55 to 200 ºC
  • Dielectric Strength: >500 V/mil
  • Thermal Conductivity: 3 BTU in/ft2 °F

Use Instructions

Weigh out the required amount and add the required amount of Catalyst. Mix thoroughly scraping both the bottom and sides of the mixing container. Evacuate the air and then pour into the Mold.

Cure Schedule: 10-15 minutes

Final hardness after 24 hrs

Data Sheets

Coming soon - Call (800) 966-5142 for more info or email info@polycastindustries.com

Related Products

Polycast Industries is your

#1 source for high quality epoxy resins
closearrow-circle-o-downbarscaret-downellipsis-vinstagramcrossmenuchevron-down linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram