hello world!
 View Us on Maps
  • Over 25 Years of Great Products & Service

  • Call Us Today for a Quote on Your Next Project

 (800) 966-5142

RTV-811

RTV-811 is a general purpose condensation cure RTV silicone rubber. RTV-811 has low shrinkage and reproduces detail well. Major application areas include flexible molding, rollers, and print pads. It is low viscosity and has high resilience. It contains no by-products, and is non-allergenic.

Details

  • Color:
    • Part A: White
    • Part B: Clear
  • Viscosity, CPS:
    • Part A: 18,000
    • Part B: 100
  • Specific Gravity
    • Part A: 1.20
    • Part B: .96
  • Mix Ratio (by weight): 100:10
  • Mixed Viscosity, CPS: 10,000
  • Pot Life @ 72° F, min.: 45
  • Shelf Life @ 72° F, months: 6
  • Hardness, Durometer Shore A: 45
  • Tensile Strength, PSI: 350
  • Tensile Elongation, %: 150
  • Tear Strength, ppi: 20
  • Service Temperature Range, °C: -54 to 200
  • Coefficient of Expansion, (cm/cm-°C): 25x10-5
  • Dielectric Strength, Volts/Mil: 500
  • Dielectric Constant 100 HZ: 3.4
  • Dissipation Factor 60 HZ: 0.002
  • Volume Resistivity, ohm-cm: 9 x 1014
  • Shrinkage after 3 days (%): .06
  • Thermal Conductivity, BTU in/ft 2 hr ° F: 2

Use Instructions

Pre-mix RTV-811 Base thoroughly. Weigh out the required amount and add the required amount of Catalyst. Mix thoroughly scraping both the bottom and sides of the mixing container. Evacuate the air and then apply.

Cure Schedule

  • 24 hours @ room temperature
  • Pot Life and cure is dependent on temperature & humidity.
  • Ideal conditions: 68-78°F (20-26°C)
  • 40-60% relative humidity

Data Sheets

Coming soon - Call (800) 966-5142 for more info or email info@polycastindustries.com

Related Products

Polycast Industries is your

#1 source for high quality epoxy resins
closearrow-circle-o-downbarscaret-downellipsis-vinstagramcrossmenuchevron-down linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram